Meaning
Process monitoring in polymer injection molding requires continuous adjustment to maintain the accuracy of pressure and temperature sensors over long production runs. Incorporating drift compensation allows the molding controller to offset the gradual baseline shift caused by sensor heating or polymer residue buildup. This adjustment governs the consistency of the switchover pressure from injection to holding phase, preventing flashing or short shots as the mold temperature rises.
It is effective only for slow, monotonic changes and cannot correct for sudden, random sensor failures.
Process Control
Transducers located inside the mold cavity experience extreme cyclic pressures and high thermal loads during each cycle. Continuous baseline correction ensures that the injection molding machine receives accurate cavity pressure data. This calibration prevents defective parts during long production runs.
Quality Consistency
Melt density varies with slight changes in melt temperature, which shifts the baseline pressure reading. Compensating for these shifts keeps the part weight within narrow tolerances. Stable part weight reduces scrap rate and material consumption.
Mold Maintenance
Accumulation of polymer outgassing products on the sensor face can mimic a pressure offset. Run-time compensation allows production to continue until the next scheduled maintenance interval. This software adjustment reduces unplanned machine downtime.