Meaning
Surface discoloration appearing as a metallic streak on a moulded part occurs when volatile components from resin additives escape the melt during injection. This silver splay indicates thermal degradation of moisture or concentrated colour pigments within the plastic. Excess moisture in the feed material forces these volatiles to the surface of the cavity, creating a visible trace that follows the direction of flow.
High shear rates during injection contribute to this phenomena by overheating the material locally as it passes through the gate. Precise control of drying parameters remains the standard method for preventing this defect in production runs.
Processing Condition
Moisture content represents the primary variable that regulates the occurrence of these streaks. Resin drying cycles must align with the specific hygroscopic nature of the polymer grade to keep the water content below the manufacturer threshold. Injection speed adjustments provide a secondary control mechanism if thermal shear causes local heating.
Pressure profiles during the packing phase sometimes mitigate visual traces by forcing the material against the tool surface before the volatiles expand. Correct machine settings rely on empirical testing of every new batch to compensate for ambient humidity changes in the plant.
Material Quality
Virgin pellets and regrind material display different sensitivities to temperature fluctuations during the melting phase. Contamination in regrind often introduces inconsistent volatiles that increase the frequency of surface defects compared to pure virgin resin. Each material datasheet defines a window for optimal processing that minimizes internal outgassing.
Deviations from these limits during the cycle force the moulder to balance part aesthetics against the cost of slowing production. Quality control procedures require a visual inspection of the first several parts of a run to establish whether the material behaves within the expected range for the given tool geometry.
Economic Impact
Scrapped parts that exhibit these streaks increase the total cost of production by raising the scrap rate and reducing output efficiency. Labour costs accumulate when operators perform manual inspections or adjust press settings to eliminate the defect. Downstream finishing processes such as painting or coating fail to cover deep surface defects, leading to finished goods rejection later in the supply chain.
Constant monitoring of drying and injection parameters prevents these losses from affecting the bottom line. Reducing the occurrence of this defect remains a requirement for maintaining profitability in high volume injection moulding.