Meaning
Physical imperfections recorded during component quality audits signal process instability or resin contamination. Production monitoring categorizes injection molding defects like sink marks, flash, burn marks and short shots based on physical morphology and root cause analysis. These structural and cosmetic deviations occur when injection pressure or melt temperature drifts outside defined operating windows during the molding cycle.
The classification excludes secondary finishing flaws introduced during post-mold assembly or painting operations.
Flaw Origin
Thermal gradients across cavity walls cause uneven shrinkage and differential warpage in thick-walled sections. High shear rates near narrow gates degrade sensitive polymers, generating surface splay or discoloration streaks. Identifying injection molding defects requires tracing visual anomalies to specific processing conditions or melt flow behaviors.
Inadequate venting traps air, creating localized compression diesel burning at weld lines.
Process Correction
Adjusting hold pressure profiles compensates for volumetric shrinkage as the polymer melt cools. Injection speed modifications eliminate jetting near gate entrances while barrel temperature reductions prevent thermal breakdown. Moulders modify gate sizing or cooling channel layouts when parameter adjustments fail to eliminate structural voids.
Specification Limit
Acceptance criteria differentiate cosmetic surface marks from structural voids that compromise mechanical load capacity. Part specifications establish clear dimensional tolerances and visual boundaries for acceptable aesthetic variations. Regrind additions increase defect frequency when variable melt flow rates disrupt cavity filling consistency.