Meaning
Thermal cycling processes rapidly change the temperature of the mold surface during each injection cycle to improve part finish and reduce internal stresses. variotherm molding involves heating the tool before injection and cooling it quickly before ejection. By keeping the mold hot during the fill phase, the process prevents the polymer from freezing prematurely, which allows for better replication of the mold texture. Rapid cooling begins once the cavity is full to solidify the part and keep the total cycle time manageable.
Surface Quality
Eliminating weld lines and improving the gloss of molded parts are the primary reasons for using this technology. The surface quality of variotherm molding is often high enough to remove the need for secondary painting or coating steps. Microstructures and fine textures are reproduced with high fidelity because the resin stays liquid longer against the steel.
Residual Stress
Gradual cooling and a hot fill reduce the amount of tension trapped inside the plastic part. The residual stress of variotherm molding is much lower than in conventional molding where the cold mold walls shock the incoming melt. Lower stress levels result in parts that are less likely to warp or crack during their service life.
Equipment Integration
Specialized heating and cooling units must be synchronized perfectly with the press controller to manage the rapid temperature swings. The equipment integration of variotherm molding requires high-capacity water or oil heaters and powerful chillers.