Meaning
The period during which a mould or material is undergoing a rapid change in temperature is characterized by non-equilibrium conditions. Transient thermal state describes the cooling of the melt within the cavity or the warming of the tool during the first few cycles of a shift. It is the phase where the heat flux is changing over time and the temperature gradients within the part are at their most extreme.
Cooling Behavior
Rapid solidification at the mould surface creates a skin layer while the core remains molten for several seconds. This transient thermal state determines the final morphology of the plastic and the level of residual stress trapped within the part. As the polymer cools, the specific volume decreases at a rate determined by the local thermal resistance.
Startup Variation
Machine operators must monitor part quality closely until the system exits this unstable phase. Moulded parts produced during the transient thermal state often exhibit different dimensions than those produced once the process reaches steady-state equilibrium.
Simulation Accuracy
Predicting the exact moment of gate freeze requires a detailed calculation of these time-dependent heat transfers. Software that models the transient thermal state allows the engineer to optimize the cooling time without risking part deformation upon ejection. This analysis includes the effects of water channel placement and the thermal conductivity of the tool steel.
A precise model prevents the common error of assuming a constant temperature across the entire cycle, which often leads to inaccurate cycle time predictions.