Meaning
Calculation of the compressive force per unit area acting on the mold mounting surfaces during the clamping phase ensures that the tool remains sealed against the high pressure of the injected melt. This force density, known as platen pressure, is determined by dividing the total clamp tonnage by the contact area of the mold. It must be high enough to prevent mold parting but low enough to avoid crushing the mold plates.
The value ceases to apply once the clamping force is released at the start of the demolding step.
Force Distribution
Uneven clamping force across the platens causes localized variation in this compressive stress. When platen pressure is concentrated in the center, the outer edges of the mold can flex and allow melt to escape. This occurs when a small mold is mounted on a very large machine.
Choosing the right machine size minimizes this issue.
Mechanical Effect
Mold deformation and platen bending are long-term consequences of incorrect force settings. Maintaining an optimal platen pressure prevents premature wear of the mold guides and pins. Excessive pressure can damage the tool or crush the venting channels.
It also increases the energy required by the clamping unit.
Defect Mitigation
Proper machine setup reduces part flashing. It ensures dimensions are kept within tolerance limits.