Meaning
Recording maximum fluid resistance during the high-velocity filling phase identifies the point of greatest mechanical stress on injection molding press components and tooling inserts. Peak pressure represents the maximum hydraulic or plastic pressure recorded at the transfer position or during early cavity packing. This metric reflects resin melt viscosity, tool runner resistance, and gate geometry under real-time processing conditions across production runs.
It applies specifically to dynamic filling and early holding phases, losing relevance once static cooling begins and melt flow ceases.
Melt Resistance
Fluid friction within the cold runner and narrow gate profiles causes rapid pressure buildup during injection. Polymer viscosity changes with shear rate and melt temperature, directly altering the observed peak pressure across identical molding cycles. Cold material slugs or degraded resin lots cause sudden spikes in resistance.
Machine Protection
Exceeding press hydraulic capabilities leads to incomplete cavity filling or machine pressure limiting. Setting alarm thresholds based on peak pressure prevents mold parting plane separation and flash generation. High injection pressure forces also increase mechanical wear on tie bars and screw tips.
Quality Correlation
Cavity pressure sensors transmit real-time data to evaluate part-to-part consistency. Fluctuations in peak pressure correlate strongly with volumetric shot size variations, part weight shifts, and flash formation. When melt viscosity drops, lower peak pressure allows higher flow velocities that can cause jetting or gas burns.
Automated reject gates divert parts produced outside specified pressure limits to maintain output quality.