Meaning
Documentation established during initial tool qualification records verified processing parameters, resin lot properties, and core cavity dimensions for reference throughout production. A baseline dossier binds raw material datasheet values to the physical reality of a qualified injection tool. It establishes the reference values for melt temperature and hydraulic pressure profiles against which production lots are judged.
Without this record, subsequent shift variations or regrind inclusions cannot be isolated from mechanical wear in the mould.
Qualification Content
Initial sampling procedures generate physical measurements of shear rate and cavity pressure under controlled machine states. The baseline dossier contains these initial trial logs along with raw resin melt flow rate certifications from the supplier. Moulded specimen shrinkage values recorded across flow and cross-flow directions complete the initial record.
Knowing these baseline dimensions enables engineers to separate thermal shrinkage anomalies from tool steel wear over consecutive production years.
Drift Detection
Routine quality control audits compare ongoing machine log data against initial reference records to detect subtle hydraulic or thermal shifts. Operating a mould outside the parameters recorded in the baseline dossier increases part defect rates such as sink marks or flash. Process technicians rely on these target numbers when restoring a machine state after unapproved operator adjustments.
Economic Consequence
Scrap costs rise quickly when production teams adjust barrel temperatures to compensate for unrecorded resin viscosity shifts.