Meaning
Mechanical properties defining the resistance of a polymer to brittle fracture under high-rate loading in the presence of a sharp stress riser are measured by standardized test methods. Specifying the notch impact strength of a resin helps engineers predict how a molded part will perform when subjected to sudden impacts or drops. This property depends on the molecular weight, crystalline structure, and elastomer content of the polymer.
Stress Concentration
Sharp corners and internal radii in molded parts act as focal points for applied stress. High notch impact strength prevents cracks from initiating and propagating from these critical regions under mechanical load. Moulders must design parts with generous transition radii to reduce local stress concentration and avoid premature failure of the component during service.
Testing Methodology
Pendulum impact testers determine the energy absorbed during the fracture of a pre-notched specimen. Standard procedures like Izod or Charpy testing measure the notch impact strength under controlled temperature and notch geometry. Variations in notch preparation can alter the test results, so precise machining of the notch is required to obtain reproducible data.
Material Toughness
Homopolymer resins often exhibit low impact resistance, whereas copolymerization or elastomer modification improves the toughness of the compound. Enhancing the notch impact strength of a compound often results in a decrease in tensile modulus and flexural rigidity. This trade-off requires careful material selection to ensure that the molded part possesses both the required stiffness and impact resistance for its intended environment.
Specifiers must balance these conflicting properties by analyzing the service temperature and potential load rates of the application.