Meaning
Component category describes plastic items that undergo significant deformation under their own weight or low clamping pressures. Managing non-rigid parts requires specialised inspection techniques to separate manufacturing errors from temporary shape changes. These components are common in the automotive and aerospace industries.
Deformation Sensitivity
Flexible materials such as elastomers or thin-walled thermoplastics do not hold their shape without support. For non-rigid parts, the geometric state changes depending on how the part is oriented or held. This makes traditional coordinate metrology difficult to perform accurately.
Measurement Constraint
Accurate data collection requires the use of a restraint fixture that mimics the part’s final assembly position. Without such a fixture, the dimensions of non-rigid parts would vary wildly between every measurement. The drawing must specify whether the tolerances apply in the free state or the restrained state.
Structural Behavior
Geometric stability is often achieved only after the part is integrated into a larger assembly. While the individual non-rigid parts may appear out of tolerance when sitting on a bench, they often conform perfectly to the mating surfaces. Engineers use finite element analysis to predict this behavior during the design phase.
The inspection strategy becomes effective once the boundary conditions are clearly defined.