Meaning
Fatigue life correction models quantify the reduction in cyclic strain endurance caused by static mean stress offsets in structural components. Material strain-life relationships under asymmetric tension-compression loading utilize morrow mean stress correction to adjust the fatigue strength coefficient by subtracting the tensile mean stress. The correction modifies the elastic strain amplitude term in strain-life equations to account for mean stress effects.
The model loses accuracy under high compressive mean stresses or when cyclic plastic strain dominates total deformation.
Strain Correction
Structural durability assessments of injection moulded thermoplastic parts rely on strain-based fatigue calculations to predict life under cyclic loading. Thermoplastic components under sustained static preload experience shifts in mean stress that alter fatigue limits. Incorporating morrow mean stress into fatigue software adjusts expected cycle counts for automotive brackets subjected to engine vibrations while under bolt torque preload.
Tensile mean stress accelerates fatigue crack initiation by opening micro-voids during tension phases. Tensile mean stress reduces allowable strain amplitude, while compressive mean stress extends cyclic life by suppressing crack growth during operation. Moulders must account for residual stress distribution caused by non-uniform cooling during injection moulding, as internal tensile stresses act identically to applied mean loads.
Material Sensitivity
Mean stress sensitivity varies between ductile polymers and rigid reinforced resins. Unreinforced ductile thermoplastics undergo localized yielding that relaxes mean stress under cyclic loading, reducing the impact of static loads. Glass-filled polymers retain high static mean stresses because rigid fibers restrict matrix plastic flow.
Incorrectly applying uncorrected fatigue limits to preloaded glass-filled parts leads to unexpected premature mechanical failure under dynamic operational stress.
Applicability Boundary
Plastic strain domination during high-amplitude low-cycle fatigue invalidates linear mean stress corrections. Large plastic strain amplitudes cause stress relaxation that dissipates mean stress within initial cycles. Under these dynamic conditions, morrow mean stress overestimates mean stress impact on fatigue life.
Calculations must transition to strain-energy fatigue models when cyclic strain exceeds yield limits.