Meaning
Cyclic deformation analysis models progressive accumulation of irreversible plastic strain under cyclic loading with non-zero mean stress. Mechanical components subjected to asymmetric force cycles undergo plastic strain ratcheting, resulting in dimensional drift and eventual low-cycle fatigue failure. The deformation mode occurs when peak cyclic stress exceeds material yield strength, causing incremental plastic extension during every load cycle.
The phenomenon ceases to accumulate when work hardening elevates yield strength above peak stress, causing material response to shake down to elastic behavior.
Structural Accumulation
Thermoplastic components operating under combined thermal and mechanical cycling experience progressive shape distortion over repeated operational cycles. Pressurized polymer pipe fittings subjected to pressure pulsations display progressive hoop strain accumulation that weakens pipe walls. Accounting for plastic strain ratcheting in finite element stress analysis prevents premature burst failures by identifying zones where plastic strain builds continuously without shakedown.
In injection moulded parts, high residual stresses combined with external cyclic forces accelerate plastic deformation, causing fitment failure in snap-fit assemblies. Moulders reducing cooling times risk higher residual stress levels, which increases susceptibility to cyclic strain accumulation. Tool design must incorporate generous radius transitions to reduce local stress peaks that trigger progressive plastic yielding.
Material Dependency
Ductile unreinforced polymers exhibit high ratcheting rates compared to fiber-reinforced composites under equivalent cyclic loads. Rigid glass fibers restrain matrix deformation, suppressing strain accumulation along fiber orientations. However, transverse to fiber direction, matrix plastic flow continues, leading to anisotropic dimensional changes over extended cyclic operation.
Limit State
Complete structural failure occurs when accumulated plastic strain reaches material rupture ductility limit. Tensile elongation capacity determines total ratcheting life prior to necking or crack initiation. Beyond this limit state, plastic strain ratcheting equations no longer apply, as macro-cracking alters structural load paths.