Meaning
Elastic deformation describes the transient deflection of tool steel plates under the influence of high injection pressures. Mold flexure occurs during the filling and packing phases when the internal melt force exceeds the local clamping force or the structural rigidity of the tool. This deflection creates microscopic gaps between the parting lines, which allows molten plastic to escape and form flash.
Tooling Failure
Excessive deflection of the core and cavity plates can lead to permanent set or mechanical fatigue in the mold structure. This permanent deformation prevents the tool from closing tightly, causing chronic quality issues that cannot be corrected by process adjustments. Over time, the repeated bending stresses initiate micro-cracks in the steel, particularly around sharp internal corners or thin cooling channels.
Mold builders run finite element analysis to ensure the selected steel thickness holds up under maximum tonnage.
Dimensional Deviation
Part dimensions vary directly with the amount of this steel deflection during the holding phase. When the plates bend away from the cavity, the part wall thickness increases beyond the toleranced limits. This variation complicates assembly steps and alters the shrinkage behavior of the cooled plastic.
Clamping Balance
Uniform distribution of the machine clamping force is essential to prevent localized bending of the mold plates. Adjusting the tie-bar tension or adding support pillars behind the ejector plate minimizes the flexural movement of the tool during injection.