Meaning
Analytical instruments track the mass loss of polymer specimens under controlled environments to determine thermal stability. Using isothermal TGA, a technician holds the sample at a single, elevated temperature to observe how it degrades over a set period. This technique is highly effective for measuring the slow release of volatile additives or the long term thermal endurance of a resin.
Volatilization Kinetics
Kinetic analysis of the resulting mass-versus-time curve yields the rate of outgassing for specific formulation components. When a polymer contains low-molecular-weight plasticizers, isothermal TGA shows a rapid initial weight loss as these additives migrate to the surface and vaporize. Once the surface is depleted, the rate of loss becomes diffusion-controlled, showing a much gentler slope over the remainder of the test.
Molding Analysis
Moulders rely on these isothermal profiles to simulate the residence time of resins inside the injection barrel. If a polymer remains in a hot barrel for too long during a cycle delay, it can begin to degrade and release corrosive gases. This test reveals the exact window of safety before the polymer molecular weight drops significantly.
Material Screening
Comparing different resin batches using this method helps verify the quality of incoming raw materials. It ensures that the compound contains the correct level of stabilizing additives to withstand production conditions.