Meaning
Thermodynamic equilibrium determines the tendency of a condensed substance to escape into the gas phase at a given temperature. In polymer processing, the vapor pressure of additives and degradation products governs their volatility and tendency to cause outgassing defects in the melt. When the vapor pressure of a component exceeds the surrounding pressure during molding or extrusion, the component boils, forming bubbles and voids in the finished part.
Thermal Dependence
The relation between temperature and this pressure is described by the Clausius-Clapeyron equation, showing an exponential increase with rising temperature. For a plasticizer like dioctyl phthalate, the pressure remains low at room temperature but rises rapidly at typical processing temperatures of two hundred degrees Celsius. This change is why processing temperatures must be monitored closely to prevent uncontrolled boiling.
Processing Defect
High pressure of volatile components causes bubbles to nucleate in the injection barrel, resulting in splay marks on the surface of the molded part. If these bubbles are trapped within the cooling part, they form internal voids that reduce the mechanical strength of the component. The aesthetic and structural losses from these defects are major causes of part rejection.
Material Selection
Selecting additives with low volatility at processing temperatures is necessary to maintain part quality. This choice involves comparing the vapor pressure curves of candidate additives to ensure they remain stable across the entire temperature profile of the molding run.