Meaning
Computational flow analysis predicts how molten thermoplastic behaves inside a mold cavity during the filling, packing, and cooling phases of the production cycle. An injection molding simulation calculates the pressure, temperature, shear rate, and volumetric shrinkage throughout the part geometry. Designers use these results to optimize gate locations, wall thicknesses, and cooling line layouts before metal is cut.
The software utilizes conservation laws of mass, momentum, and energy to model the non-Newtonian behavior of polymer melts.
Numerical Analysis
Finite element meshes partition the three-dimensional CAD model into small elements where equations are solved iteratively. This numerical approach highlights potential molding defects such as weld lines, air traps, and high-shear regions that could degrade the polymer. By simulating different melt and mold temperatures, engineers can identify the process window that produces the lowest part warpage.
Tooling Design
Simulating the flow allows mold builders to balance runner systems so that all cavities fill simultaneously in multi-cavity molds. This balancing avoids overpacking some cavities while others are underfilled, which stabilizes part weights and dimensions across the run. It also estimates the clamp force required to keep the mold halves closed, ensuring that the selected molding machine has sufficient capacity.
Process Tuning
Technicians use simulation data to set initial profiles for injection speed, packing pressure, and cooling times on the actual production machine. This transfer of parameters reduces the trial-and-error time spent during mold trials from days to hours.