Meaning
Monitoring methods for injection moulding that use sensors placed directly in the mould cavity provide real-time pressure data from the polymer melt itself. In direct cavity sensing, transducers sit flush with the internal wall to record flow dynamics. This measurement detects the transition from filling to packing stages.
Face Alignment
Positioning of these transducers requires high precision machining of the tool steel to ensure the active face sits perfectly level with the cavity surface. If the sensor is recessed, the plastic part develops a raised blemish, whereas a protruding sensor causes a depression in the moulded surface. Toolmakers choose locations near the gate or at the end of fill to capture the most representative pressure drops.
The cable routes run through dedicated channels in the ejector plate or the mould base to protect the wiring from pinch points during tool movement.
Switchover Trigger
Control systems use the resulting live curve to trigger the switchover from fill to pack based on pressure rather than screw position. Using direct cavity sensing reduces weight variation and minimises part shrinkage by adjusting the process to compensate for variations in material viscosity. Moulders who rely on this technique achieve tighter part specifications and lower reject rates because the machine reacts to the actual state of the polymer rather than hydraulic pressure.
When the sensor reports a peak pressure that exceeds the safety threshold, the controller can abort the cycle before flash occurs.
Volatile Deposition
Electrical noise and mechanical vibrations from the press can distort the microvolt readings if the cables lack shielding. Contaminants such as outgassed volatiles and residual mould release agents also coat the sensor face over long production runs. Regular maintenance involves cleaning the sensor face with solvent during tool teardowns to prevent drift in the baseline signal.
Without this cleaning, the accuracy of the pressure curve deteriorates and leads to false reject signals.