Meaning
Dimensional limits specified for the machined cavities in a mould base that hold the inserts ensure a precise fit of the tool components. The tool steel pocket tolerance determines how tightly the insert is held to prevent shifting during high-pressure injection. This precision is essential for maintaining part dimensions and preventing flash.
Insert Alignment
Creating these pockets requires advanced milling or electrical discharge machining to hold tolerances as tight as a few microns. If the pocket is too large, the insert can shift under the injection pressure, causing parting line mismatch and flash on the moulded parts. If the pocket is too small, the insert will not fit, or it will be compressed so tightly that it deforms, which alters the cavity shape.
Toolmakers use precise measurement tools like coordinate measuring machines to verify the dimensions before assembly.
Thermal Expansion
Since the inserts and the mould base can be made of different steels with different thermal expansion rates, the pocket clearance must account for temperature changes during operation. As the mould heats up to its run temperature, the pocket and the insert expand. If the pocket does not allow for this expansion, high stress can build up, leading to cracking of the steel or deformation of the insert.
Engineers calculate the expected thermal expansion to design the appropriate cold clearance.
Fatigue Avoidance
Maintaining the correct fit prevents premature wear and fatigue of the tool steel components during long production runs. A tight, stable fit reduces friction and vibration, which extends the life of the tool. This stability ensures that the mould continues to produce parts within the specified tolerances over millions of cycles.