Meaning
Sequential valve gating allows for the controlled entry of molten plastic into a cavity through multiple points at different times. Using cascade injection moulding prevents the formation of weld lines by ensuring the melt front from one nozzle passes the next nozzle before it opens. This technique is standard in the production of large automotive exterior components where structural strength and surface finish are both required.
Flow Timing
Software timers or screw position sensors determine the precise moment each valve gate opens. Every cascade injection moulding application requires a hot runner system capable of independent needle actuation. A slight error in the timing sequence causes a pressure drop that leaves a visible mark on the finished part.
Surface Quality
Removing the collision of opposing flow fronts eliminates the aesthetic defects typically found in large surface area mouldings. Because cascade injection moulding maintains a continuous flow front, the resulting part lacks the weak points associated with traditional multi-gate filling. Mechanical properties remain uniform across the entire geometry of the component.
Strength is increased in areas that would otherwise contain cold weld lines.
Tooling Requirement
Specialized manifolds and hydraulic power units are necessary to support the independent movement of the valve pins. Maintenance focuses on the hydraulic lines and the software logic that governs the opening sequence.