Meaning
Control components in hydraulic circuits adjust the volume and direction of oil flow based on the strength of an electrical signal. A proportional spool valve enables the injection moulding machine to ramp speeds up or down with high precision. These components bridge the gap between simple on-off solenoids and complex servo-driven pumps.
Signal Response
Voltage changes from the machine controller move the internal spool to vary the size of the flow opening. In a proportional spool valve, the position of the spool is monitored by a transducer to ensure the actual flow matches the commanded value. This feedback loop allows for smooth transitions between different phases of the moulding cycle.
Flow Regulation
Internal geometry of the valve body determines the relationship between the spool position and the hydraulic output. Using a proportional spool valve allows the machine to hold a very steady packing pressure even as the oil temperature changes. Flow rates can be adjusted in increments of less than one percent.
This level of control is necessary for thin wall parts where speed is critical.
Component Wear
Regular filtration of the hydraulic fluid is required to prevent particles from jamming the tight clearances of the spool. Dirt in the hydraulic oil can cause the spool to stick and lead to erratic ram speeds.