Meaning
Signal deviation describes the gradual shift in the baseline output of a pressure or temperature sensor when no physical stimulus is applied. Zero point drift occurs in melt pressure transducers and cavity sensors due to thermal expansion, mechanical fatigue, or polymer buildup on the sensor face. This shift introduces errors into the process control system, leading to incorrect injection-to-pack transfer points and part weight variations.
Temperature Effect
High melt temperatures cause the sensor diaphragm and internal strain gauges to expand unevenly, which changes the baseline electrical resistance. This thermal drift is particularly noticeable during the initial heating of the extruder barrel or mold steel. To minimize these errors, technicians tare the sensor signal only after the equipment has reached a stable operating temperature.
Running a tare operation on a cold sensor leads to inaccurate pressure measurements once production begins.
Signal Tare
Resetting the sensor baseline before each cycle compensates for this continuous deviation. This automatic zeroing function ensures that pressure readings remain consistent from shot to shot, despite gradual thermal or mechanical shifts.
Process Failure
Uncorrected drift can cause the injection molding controller to switch to holding pressure too early or too late. This failure leads to incomplete filling or overpacking of the cavity, causing short shots or flashing.