Meaning
A systematic diagnostic procedure involves injecting progressively larger amounts of polymer melt into a mould to analyze the flow path and filling pattern of the cavity. Conducting a short shot progression study allows technicians to visualize how the plastic fills the tool, identifying weld lines, air traps, and unbalanced flow in multi-cavity moulds. This analysis is performed during the initial trial of a new tool or when troubleshooting filling defects in an existing production run.
The physical parts produced during this test act as a permanent record of the filling pattern.
Methodological Sequence
Operators begin by reducing the shot size to approximately fifty percent of the full part volume. The injection volume is then increased in regular increments of ten percent for each subsequent shot. During this process, the packing pressure is kept at zero to ensure that the fill pattern is determined solely by the dynamic flow of the melt.
Each partially filled part is collected, labeled, and analyzed to trace the progression of the melt front.
Defect Identification
Unbalanced filling between cavities becomes obvious when comparing the relative fill levels at each step of the test. Flow hesitation or racetrack effects can also be seen on the surfaces of the short shots. These visual cues pinpoint the exact locations where venting or gate modifications are required.
Tool Optimization
Modifying the gate freeze or cavity thickness based on these studies ensures a balanced flow and uniform part quality. This diagnostic is standard practice for high-precision moulding.