Meaning
Strategic integration of design and process features used to stop the thermal degradation of resin caused by compressed gas in the tool. Successful mold burn prevention requires a combination of optimized venting and melt temperature management. These actions ensure that the air displaced by the incoming plastic does not heat up to the point of scorching the material.
Vent Placement
Locating exhaust paths at the very end of the flow length where air naturally gathers is the most effective way to avoid scorching. Engineers use flow simulation software to predict these entrapment points before the tool is built. If a burn appears in a mid stream location, it often indicates a trapped pocket of air that requires a specialized venting pin.
Injection Velocity
Slowing the rate at which the cavity fills gives the air more time to escape through existing vents without reaching high temperatures.
Thermal Control
Precise temperature control in the barrel and the hot runner system is a primary defense against burning. Excessively hot material is more prone to immediate degradation when it encounters even slightly compressed air. Thermal fluctuations during the process can lead to localized scorching even if the average temperature is within limits.
Correct management of the thermal profile provides a larger margin of safety.