Meaning
Positioned at the contact interface between a hot runner nozzle and a cold cavity plate, mechanical deformation prevents liquid polymer from escaping into internal mold plate voids. Steel expansion under thermal load creates contact pressure against mating surfaces, defining melt seal compression as the primary barrier against polymer leakage in runner systems. This mechanical preload governs plastic containment under cavity injection pressures up to two thousand bar.
It applies strictly to the boundary seal area around nozzle tips and manifold drops, excluding external hydraulic or mechanical clamp force systems.
Interface Resistance
Thermal expansion of the hot runner manifold generates axial force against the stationary cavity plate. Steel components expand at predictable rates as operating temperatures reach processing setpoints, creating tight sealing faces. Insufficient pre-load allows molten polymer to creep between steel plates, causing thermal degradation and electrical short circuits in heater bands.
Viscous Leakage
Melt pressure during injection exerts outward force that counters interface contact pressure. Highly fluid polymers like polyoxymethylene and polyamide require higher sealing contact forces than high-viscosity resins like polycarbonate. Excess compression deforms tip seating areas, permanently damaging precision nozzle components.
Bushing Tolerance
Precision machining limits ensure correct preload spacing prior to heat-up. Tight manufacturing tolerances maintain correct melt seal compression across variable operating temperatures.