Meaning
Moisture quantification in polymer pellets before processing determines the maximum allowable water content required to prevent hydrolytic degradation during melting. The establishment of a karl fischer moisture limit provides a precise titration-based benchmark for drying operations. This evaluation prevents the processing of wet resins that would lose molecular weight in the extruder barrel.
Process Sensitivity
Engineering plastics like polyamide and polycarbonate are highly susceptible to chemical breakdown when heated in the presence of water. Adherence to the karl fischer moisture limit ensures that the resin is dry enough to maintain its mechanical properties during melt processing. Measurement via traditional loss-on-drying scales often yields inaccurate results due to the volatilization of additives.
Defect Prevention
Excessive water content in the resin feed leads to surface splay and structural voids in molded components. If the pellet moisture exceeds the specified karl fischer moisture limit, steam bubbles form in the melt and are injected into the mould cavity. These bubbles create silvery streaks on the part surface and compromise the cosmetic appearance.
In structural parts, the internal voids severely reduce the impact strength. Processors must utilize desiccant dryers to achieve the required dryness level.
Moulding Economics
Extended drying cycles increase the energy consumption of the moulding plant and reduce overall equipment efficiency. Operating below the karl fischer moisture limit avoids the costs associated with scrap parts and customer rejections. Investing in efficient drying systems pays off through lower reject rates.