Meaning
Phenomenological hydrodynamic equations predict the orientation tensors of short and long reinforcement fibers suspended in molten polymer during injection molding. The folgar-tucker fiber model introduces an isotropic rotary diffusion term to account for fiber interactions in concentrated suspensions. By balancing hydrodynamic alignment forces against inter-fiber collision dynamics, this mathematical framework establishes the spatial tensor distribution that dictates anisotropic mechanical properties and volumetric shrinkage across a molded component.
It operates across fill and pack phases where shear rates vary across cavity thickness, though its predictive accuracy decays in thin-wall regions where wall slip or rapid freezing alters velocity gradients.
Rotary Diffusion
Hydrodynamic forces in flowing polymer melts align rigid fibers along local velocity streamlines while inter-particle contacts continuously disrupt this alignment. Incorporating an empirical interaction coefficient into the governing differential equations enables the folgar-tucker fiber model to capture this tumbling motion. Without this interaction term, numerical predictions overstate alignment along primary flow paths.
The resulting tensor values feed directly into downstream structural solvers to calculate localized elastic moduli.
Anisotropic Shrinkage
Fiber alignment directly alters the thermal expansion behavior of reinforced compounds during cooling inside the tool. Along the principal fiber direction, thermal contraction is restrained by the high modulus of filler elements, while transverse direction experiences unconstrained matrix shrinkage. Applying the folgar-tucker fiber model allows process engineers to predict differential shrinkage across core and skin layers.
Out-of-plane warpage predictions rely heavily on this localized orientation state.
Simulation Boundary
Numerical solutions to the orientation equations assume a homogeneous concentration of fibers throughout the fluid continuum. High shear rates near gate regions often cause fiber migration toward the center of the flow channel, creating localized concentration gradients that fall outside model assumptions. Long fibers also suffer mechanical degradation from screw shear, shifting the aspect ratio distribution during plasticization.
These physical deviations set a clear boundary where raw simulation output must be adjusted using empirical breakdown parameters.