Meaning
Statistical process capability assessments conducted across segmented sub-groups isolate discrete sources of variation within multi-cavity injection moulds, individual tooling actions, or multi-spindle stations. Conventional bulk capability metrics average overall manufacturing spread, masking cavity-specific defects or cyclic tool drifts behind combined population variance. Stratifying measurements into distinct cavity, machine cycle, or raw material batch sets reveals true tooling precision versus environmental noise.
Calculating stratified capability cp cpk determines whether low process indices stem from wide within-cavity process variance or between-cavity geometric offsets. The methodology stops applying when sample populations are aggregated into single un-stratified data sets where individual cavity identities are lost.
Statistical Mechanics
Traditional potential capability indices compare part dimensional tolerance ranges against six times the overall process standard deviation. Process performance indices reflect the actual distance between subgroup means and the nearest specification limit. Stratified calculations isolate within-cavity variation from overall tooling variation, yielding discrete indices for each independent cavity across the mould base.
Large spreads between individual cavity means shift combined distributions toward specification borders even when each cavity runs with high inherent consistency. Separating within-cavity standard deviations from cavity-to-cavity mean shifts identifies whether steel modifications or process parameter tuning are required to stabilize production.
Tooling Diagnosis
Cavity-specific capability evaluations locate dimensional non-conformance stemming from tooling errors or uneven thermal cooling. A single cavity with low indices surrounded by compliant cavities indicates localized cooling channel blockages, gate erosion, or electrical heater band failures. Systematic dimensional deviations between inner and outer cavities indicate runner imbalance or unequal mould clamp deflection under tonnage.
Machining tolerances in multi-cavity tooling must be adjusted through steel re-cutting or sinker EDM work when individual means remain fixed off-target. Parameter adjustments like barrel temperatures or hold pressures shift all cavities simultaneously, failing to fix isolated single-cavity deviations.
Procurement Qualification
Tooling sign-off procedures require individual verification that every active cavity satisfies mandated statistical thresholds before mould shipment. Acceptance criteria typically dictate minimum capability thresholds of one point three three or one point six seven for critical engineering dimensions on all cavities evaluated independently. Combining multi-cavity part measurements into a single non-stratified capability calculation masks out-of-spec cavities within broad statistical standard deviations.
Suppliers verify stability across all cavities using full-shot inspection data before entering serial manufacturing. Rigorous stratified capability cp cpk analysis qualifies tooling precision independent of aggregated machine spread.