Meaning
Performance metrics that quantify the gradual, unintended change in the output of a sensor over time under constant process conditions indicate measurement stability. The signal drift rate determines how quickly an injection moulding sensor loses its calibration during continuous runs. This value is critical for maintaining consistency in process control.
Cyclic Heating
Temperature cycling within the mould is a primary cause of sensor drift, as the high heat of the melt repeatedly warms and cools the transducer. This thermal fluctuation causes the sensor materials to expand and contract, which alters the electrical resistance of the strain gauges or the piezoelectric crystal. Over many cycles, these changes accumulate, causing the zero point of the sensor to shift away from its calibrated value.
In addition, mechanical stress from clamping forces can accelerate this change, requiring more frequent calibration of the system.
Calibration Deviation
If the drift is left uncorrected, the moulding machine receives inaccurate pressure data, which leads to drift in the part weight and dimensions. The machine may increase the pack pressure to compensate for what it perceives as a drop in cavity pressure, resulting in over-packed parts or flash. Conversely, the system might under-pack the cavities, causing sink marks or voids.
Moulders monitor the drift rate to schedule preventive maintenance and recalibration before the drift exceeds the product tolerance limits.
Zero Correction
Modern controllers use software algorithms to reset the baseline sensor reading to zero between moulding cycles. This automatic zeroing compensates for slow, long-term drift, ensuring that the start of each cycle is measured from a consistent reference point. This software correction improves the reliability of the pressure readings without requiring manual operator intervention.