Meaning
Physical configuration of the channels conveying molten resin from the machine nozzle to the mould cavities dictates the efficiency of the injection process. Optimal runner geometry minimizes material waste while maintaining the thermal energy of the melt. Designers choose between cold and hot systems depending on the production volume and the heat sensitivity of the polymer.
Shear Management
Circular cross sections provide the most efficient flow with the least surface area relative to volume. Because plastics are shear-thinning materials, the friction generated against the runner walls influences the viscosity of the material as it enters the gate. Parabolic flow profiles are best maintained in full round channels.
Material Consumption
Volume of the feed system represents a large cost factor in high-speed moulding where the runner is reground or discarded. Reducing the thickness of the channels can lower cycle times by speeding up cooling, but it also increases the injection pressure required to fill the part. Balancing these factors is the core of feed system optimization.
Thick runners waste resin while thin runners may freeze before the cavity is fully packed.
Flow Resistance
Friction along the length of the runner causes a pressure drop that the injection unit must overcome. When the runner geometry is poorly planned, the machine may hit its pressure limit before the cavities are full. This leads to inconsistent part dimensions and higher energy consumption per shot.