Meaning
Rheological testing identifies unstable flow conditions that occur when molten polymer is extruded at high shear rates through a die. In extrusion lines, pressure oscillation regime characterizes the periodic fluctuations in head pressure that arise during melt fracture transitions. This behavior occurs in the boundary between stable flow and gross melt fracture.
It causes severe dimensional variation along the extrudate. Continuous monitoring of melt pressure allows operators to identify this unstable window before production begins.
Instability Zone
Polymer melt compression and decompression within the die barrel trigger cyclical flow variations. When operating within the pressure oscillation regime, the slip-stick transition causes the melt to alternately stick to and slip from the die wall. This cycle repeats continuously.
Fluctuations produce alternating smooth and rough regions on the product.
Machine Force
Extruder drives experience fluctuating torque levels when flow resistance varies. In the pressure oscillation regime, the mechanical load on the motor cycles in synchrony with the melt pressure. High fluctuations damage machinery.
Increasing melt temperature reduces the viscosity and stabilizes flow.
Product Defect
Profiles must maintain consistent thickness to meet dimensional tolerances. Operation within the pressure oscillation regime results in scrap due to banded surface defects and thickness variations. Scrap rates increase quickly during unstable runs.
Processors must shift output rates to exit this zone.