Meaning
Additive chemistry improves the flow of molten resin through extrusion dies by coating the metal surfaces with a low-friction layer. Incorporating a fluoropolymer process aid allows for higher throughput and reduced energy consumption during the manufacturing of films and pipes. This material works at very low concentrations, usually between two hundred and one thousand parts per million.
It prevents the polymer melt from sticking to the die wall, which eliminates surface defects.
Surface Quality
Melt fracture disappears when the interface between the polymer and the die is lubricated. The use of a fluoropolymer process aid creates a smooth exit for the material, resulting in a high-gloss finish. This is particularly effective for linear low density polyethylene, which is prone to sharkskin defects at high shear rates.
Clearer films and more consistent pipe dimensions are the direct result of this stabilization.
Production Efficiency
Tooling maintenance decreases when the internal surfaces of the machine remain clean and free of charred resin. A fluoropolymer process aid reduces the accumulation of degraded material at the die lip, known as die build up. This allows for longer production runs between cleaning cycles and reduces the amount of scrap generated during start up.
Pressure at the die head also drops, which protects the motor and gearbox from excessive wear.
Formulation Chemistry
Formulation chemistry determines how well the additive performs with other ingredients like pigments or anti-block agents.