Meaning
Precision guiding components utilize an internal interference fit between the balls and the raceway to eliminate radial clearance. Preloaded ball bushings provide the high levels of positional accuracy required for the alignment of complex mold plates and multi-cavity tools. By removing all play from the guiding system, these components ensure that cores and cavities mate perfectly every time the tool closes.
Alignment Precision
Zero-clearance operation prevents the slight shifting or cocking that can occur with standard sliding bushings. In high-speed packaging molds, preloaded ball bushings maintain the concentricity of thin-wall containers where even a few microns of misalignment would cause uneven wall thickness. This level of control is essential for molds with very tight tolerances or delicate shut-offs.
Load Capacity
Internal tension within the bearing assembly distributes the weight of the mold plates across multiple points of contact. Although preloaded ball bushings offer superior accuracy, they require careful calculation of the static and dynamic loads to avoid premature failure of the rolling elements. Overloading the system can lead to brinelling, where the balls indent the hardened shafts and ruin the smooth motion.
Friction Reduction
Rolling contact replaces the sliding contact found in traditional bronze or steel bushings. This change significantly reduces the heat generated during high-cycle operations and allows for faster machine movements. Because preloaded ball bushings operate with minimal resistance, they lower the energy consumption of the molding machine and reduce the wear on the primary guide pins.
Proper lubrication remains necessary to flush out contaminants and prevent oxidation of the precision surfaces.