Meaning
Tooling components provide a physical stop that prevents the excessive compression of delicate mould faces or pins during the clamping phase. Typically installed in the corners of the mould base, kiss blocks absorb a portion of the clamp force to maintain a contact pressure that does not deform the steel. These blocks ensure that the closing force of the press does not crush the precision-machined details of the cavity.
Mould Protection
Preventing the two halves of a tool from slamming together protects the parting line from deformation and premature wear. Without kiss blocks, the full tonnage of the injection machine would be concentrated on the smallest contact points of the tool. This mechanical barrier extends the service life of the mould and reduces the frequency of refurbishments.
Compression Control
Maintaining a consistent gap allows for the proper function of vents and delicate shutoff features. If the tool closes too tightly, kiss blocks prevent the crushing of vent grooves that are only microns deep. This control is essential for ensuring that air can escape the cavity without allowing resin to flash.
Shutoff Integrity
Precision in the height of these blocks determines how well the mould seals around inserts or sliding cores. When kiss blocks are ground to the correct dimension, they allow the primary sealing surfaces to touch with just enough pressure to prevent leaks. Inconsistent block heights can cause the tool to cock, leading to uneven wear and part dimensions that vary across the cavity.