Meaning
Compression techniques involve the physical displacement of a mould component to press into a cooling part and compensate for material shrinkage. In high-precision manufacturing, coining ensures that thick sections or aesthetic surfaces maintain their intended geometry without internal voids. The process relies on the material being in a semi-solid state where it can still flow locally under high force.
Sink Mitigation
Localized pressure prevents the outer skin of a part from pulling inward as the hot core cools and contracts. While standard packing pressure struggles to reach isolated thick features, coining applies force directly to the problem area through a movable pin or slide. This mechanical intervention eliminates the visible depressions that typically form on the surface.
Local Compression
Moving a portion of the cavity wall into the melt stream after the gates have frozen allows for higher density in specific regions. Because coining occurs at the end of the cycle, it can improve the optical clarity of thick lenses by reducing internal stresses. The force applied must be timed with the cooling rate of the specific polymer to be effective.
Tooling Design
Incorporating movable inserts requires complex hydraulic or mechanical actuators within the mould base. These mechanisms add cost to the tool but reduce the cycle time by allowing parts to be ejected while the core is still relatively warm. Precise alignment is necessary to prevent the formation of witness lines where the moving component meets the static cavity.