Meaning
Pendulum based tests measure the energy required to break a notched or unnotched plastic specimen under high strain rates. The izod impact strength is a standard metric for comparing the toughness of different resin grades. Results are expressed in units of energy per unit of thickness or area.
This test identifies how a material will behave when subjected to sudden shocks in the field.
Energy Absorption
Kinetic energy lost by the pendulum during the strike represents the work done to fracture the sample. When an izod impact test is performed, the height of the swing after the break is recorded. Toughened polymers like polycarbonate absorb a large amount of energy through plastic deformation.
Brittle materials like polystyrene snap with very little energy loss.
Notch Sensitivity
Stress concentrations at the tip of a machined groove accelerate the formation of cracks. The izod impact value of a notched specimen is usually much lower than that of an unnotched one. Sharp corners in a molded part create a similar effect that leads to premature failure.
Engineers must consider the radius of the notch when designing components for high stress environments.
Failure Mode
Visual inspection of the broken surface provides clues about the ductile or brittle nature of the resin. A clean break indicates that the izod impact event occurred with minimal yielding. Stress whitening or jagged edges suggest that the polymer chains were able to reorganize before snapping.
Temperature and notch radius influence whether a material fails in a graceful or catastrophic manner. Results from this test help molders select the correct impact modifier for their application.