Meaning
Volumetric speed at which the screw moves forward to fill the mould cavity with molten polymer. This injection rate controls the velocity of the flow front as it travels from the gate to the furthest reaches of the part. It is typically measured in cubic centimeters per second or as a percentage of the machine maximum speed.
Shear Management
High velocities increase the shear rate within the melt, which lowers the viscosity of non-newtonian fluids like plastics. Selecting a fast injection rate allows the material to fill thin-walled sections before it cools and freezes. Excessive speeds can lead to jetting or molecular degradation through frictional heating.
Aesthetic Quality
Speed of the flow front influences how the air is displaced from the cavity and how the plastic contacts the walls. A slow injection rate might lead to hesitations or flow marks where the material cools prematurely. Faster filling improves the replication of the mould texture but may cause gas traps or burn marks at the end of the fill.
Profiled filling speeds allow the machine to slow down as the melt passes through the gate and then accelerate to fill the bulk of the part.
Flow Consistency
Maintaining a constant speed ensures that every part produced has the same molecular orientation and internal stress. If the injection rate fluctuates, the pressure at the gate varies and causes inconsistent part weights. Automated sensors on modern presses adjust the hydraulic pressure to maintain the programmed speed regardless of material changes.