Meaning
Graphic representation of the force applied by the screw or plunger during the filling and packing stages of a molding cycle. The injection pressure curve tracks how the resistance of the molten polymer changes as it enters the mold cavity. Monitoring this data allows technicians to ensure that the part reaches its required density and dimensions.
Process Fingerprint
Deviations from the baseline indicate fluctuations in resin viscosity or temperature. If the peak of the injection pressure curve shifts higher, the material might be too cold or contain excessive regrind. This change warns the operator that the machine is working harder to fill the same volume, which often leads to internal stress in the plastic.
High stress causes warping.
Defect Mitigation
Specific shapes in the data correspond to physical flaws in the finished component. A sudden drop in the injection pressure curve before the transition to holding pressure might suggest a leak in the check ring or a ruptured hydraulic line. Catching these errors through real-time analysis prevents the production of thousands of short-shot parts.
Stability is the priority.
Quality Benchmark
Consistency across thousands of cycles is the goal for any high-volume production run. Engineers set alarm limits around the injection pressure curve to automatically reject parts that fall outside acceptable ranges. This automated verification maintains tight tolerances even when environmental conditions in the plant vary throughout the day.