Meaning
Injection moulding machinery maintains a physical volume of polymer melt in front of the screw at the end of the injection stroke. The holding pressure cushion refers to the remaining forward distance of the screw during the packing and holding phases of the moulding cycle. It ensures continuous hydraulic force transmission into the mould cavity to compress the cooling resin and prevent backflow.
The boundary of this variable applies strictly to the high-pressure packing segment of the injection cycle before gate freeze-off occurs.
Volumetric Compensation
Cooling polymers undergo extensive volumetric contraction inside the cold metal cavity during solidification. Maintaining an adequate holding pressure cushion allows the injection unit to force additional melt into the cavity, offsetting volumetric shrinkage. If the cushion drops to zero, the screw bottoms out against the barrel nozzle, terminating pressure transmission prematurely.
Loss of pressure control results in severe sink marks, internal void formation, and under-sized part dimensions.
Process Drift
Variations in raw material viscosity and non-return valve wear alter screw forward positioning from shot to shot. A fluctuating holding pressure cushion indicates inconsistent check-ring sealing or thermal degradation of the polymer melt. Inconsistent cushion size correlates directly with part weight variation and dimensional instability across a molding run.
Incorporating regrind with inconsistent melt flow rate amplifies cushion drift, forcing frequent manual adjustments to barrel temperature or injection speed.
Screw Transfer
Proper velocity-to-pressure switchover timing protects the screw from bottoming out against the nozzle. Setting an appropriate holding pressure cushion provides a mechanical safety margin that absorbs slight variations in melt compressibility.