Meaning
Free-state variation is an unconstrained dimensional movement that occurs when a moulded polymer part leaves the restrictive boundaries of a steel tool and undergoes post-moulding relaxation. Molecular chains that were forced into frozen alignment under high injection pressure seek thermal and mechanical equilibrium once the part ejects, resulting in warp and differential shrinkage. This phenomenon governs the final part dimensions in precision injection moulding, dictating the exact boundary where tool geometry stops dictating shape and internal stress takes over.
Thermal Relaxation
Residual stress accumulated during the filling phase drives dimensional shift as cooling continues past ambient conditions. Part temperature spikes immediately after ejection, allowing amorphous regions in semicrystalline polymers to contract freely without core restraint. Unbalanced cooling rates across thick and thin wall sections accelerate this shift, creating uneven shrinkage gradients across the geometry of the component.
Resin Shrinkage
Virgin polymer batches exhibit predictable volumetric contraction, while heavily recycled regrind introduces viscosity shifts that alter flow dynamics and post-moulding movement. Processing temperatures set during plastication determine the initial frozen-in orientation level, directly tying barrel heat settings to the magnitude of subsequent warp. Excessive injection speed increases molecular alignment, leading to greater free-state variation when the cooling part finally clears the mould cavity.
Part Conformance
Dimensional inspection labs measure final geometry against a rigid CAD model to quantify the deviation caused by unconstrained post-moulding movement. Toolmakers apply shrinkage correction factors directly to steel cutting paths to compensate for expected free-state variation before initial sampling runs begin. Finished components failing to hold tight profile tolerances require secondary fixturing or annealed cooling racks to arrest movement before assembly.