Meaning
The maximum stretch that a polymer melt or film can sustain before rupture or onset of instability defines its processing boundary. This draw ratio limit is determined by the molecular weight, chain entanglement density, and temperature of the resin. Exceeding this boundary results in tearing, necking, or line breakages during extrusion and drawing operations.
Mechanistic Action
Chain untangling and molecular alignment govern the behavior of polymer films under high tension. When the draw ratio limit is approached, the polymer molecules are fully extended and can no longer glide past each other. This condition causes micro-voids to form, which quickly grow into macroscopic tears.
Processing Strategy
Optimizing extruder temperatures and cooling rates allows operators to run lines closer to maximum productivity. In fiber spinning and film line operations, the draw ratio limit can be adjusted by modifying the molecular weight distribution of the polymer. A broader distribution provides shorter chains that act as lubricants and longer chains that provide melt strength.
This adjustment increases the maximum safe draw speed, allowing for thinner films and fibers with higher tensile strength without risking line breaks.
Material Property
Linear low-density polyethylene exhibits a higher capacity for draw down compared to high-density grades. This difference in the draw ratio limit depends on the frequency and length of short-chain branching.