Meaning
Volumetric or weight proportions of ordered molecular domains relative to total material mass quantify the degree of structural ordering inside semicrystalline polymers. Measuring the crystalline fraction defines whether a moulding displays high stiffness and barrier efficiency or greater flexibility and impact compliance. Laboratory characterisation relies on differential scanning calorimetry or wide-angle X-ray scattering against theoretical absolute crystal baselines.
Datasheet values represent idealised slow-cooled test plaques, whereas commercial injection moulded components exhibit lower crystalline fraction levels owing to rapid quenching against cold cavity walls. The measurement stops applying to completely amorphous thermoplastics like polycarbonate and polystyrene, which lack ordered lattice networks entirely.
Solidification Rate
Cooling speeds across mould profiles impose direct constraints on chain alignment during phase transition. When molten resin contacts chilled tool steel, molecular chains freeze instantaneously into an amorphous skin that exhibits a suppressed crystalline fraction. Core sections insulate longer, allowing thermal mobility to organise high crystalline fractions before heat dissipation ceases.
Adjusting tool temperatures from thirty degrees to eighty degrees Celsius in polyamide moulding dramatically increases core crystallisation while widening internal property gradients.
Mechanical Consequence
Rigid crystalline regions act as physical crosslinks that raise tensile modulus and yield point while reducing elongation at break. Increasing the crystalline fraction shifts failure modes from ductile necking to brittle fracture under dynamic load. Sourcing specifications that permit broad molecular weight distributions generate unstable crystal development from lot to lot.
Regrind resin containing degraded polymer chains crystallises rapidly around degraded fragments, generating high crystalline fraction totals that exhibit lower overall impact toughness.
Post-Process Stability
Volume shrinkage progresses outward as disordered melt transforms into closely packed crystal lattices. Moulded components with an underdeveloped crystalline fraction at ejection undergo secondary crystallisation in storage, driving continuing shrinkage and uncontrolled part distortion. Exposure to operating temperatures above the glass transition triggers further crystalline alignment over weeks of end use.
Dimensional tolerances require post-moulding conditioning or annealing protocols to lock crystal fractions before final assembly.