Meaning
Delayed dimensional reduction occurring in thermoplastic mouldings after part ejection and gate trimming accounts for ongoing volumetric changes across part shelf lives. Continued structural contraction defines post-moulding shrinkage, which stems from secondary crystallization and relaxation of moulded-in orientation stresses. Standard quality controls assess part geometries forty-eight hours post-production, yet semicrystalline polymers like polyoxymethylene and polypropylene continue contracting across subsequent weeks.
The phenomenon terminates when thermodynamic equilibrium or full crystalline packing halts further physical densification.
Secondary Compaction
Rearrangement of frustrated molecular chains into tightly packed crystalline structures continues long after components leave injection moulding cavities. Semicrystalline polymers exhibit substantial post-moulding shrinkage because initial cooling cycles freeze amorphous fractions that slowly crystallize at ambient factory temperatures. Higher mould temperatures reduce this secondary volume loss by achieving maximum crystalline fraction inside the press, whereas cold moulds produce parts with deceptively tight immediate dimensions that subsequently shrink out of specification over storage.
Environmental Acceleration
Storage temperature and operating atmosphere govern the pace and magnitude of delayed part contraction. High warehouse heat provides thermal energy that accelerates post-moulding shrinkage, transforming flat panels into warped profiles within days. Hygroscopic materials exhibit competing mechanisms, where moisture absorption swells the polymer matrix while simultaneously plasticizing molecular chains to facilitate secondary crystallization.
Exposure to warm, humid environments often triggers sudden dimensional contraction in poorly conditioned polyamides.
Tool Design Tolerance
Toolmakers adjust cavity dimensions to account for both immediate mould shrinkage and delayed post-moulding shrinkage. When predicting final part fit, engineering calculations must differentiate in-press contraction from delayed post-moulding shrinkage to avoid cutting undersized steel. Unfilled semicrystalline resins demand generous shrinkage allowances that account for continuing dimensional drift.
Glass-filled compounds mitigate this delayed contraction by physically constraining polymer matrix movement along fibre alignment axes. Regrind materials complicate predictive shrinkage models, as shortened molecular chains and thermal impurities accelerate secondary crystallisation rates unpredictably. Assembly tolerances demand that critical mating components age for standardized holding periods before final fastening.