Meaning
Material resistance defines the point at which a polymer melt begins to exhibit flow instabilities or surface defects. Processing above the critical shear stress typically results in sharkskin or melt fracture on the surface of extruded profiles or injection moulded parts. This threshold varies by molecular weight distribution and branching within the polymer chain.
Linear low density polyethylene often reaches this limit sooner than highly branched low density versions.
Processing Threshold
Melt stability depends on maintaining a laminar flow through the die or gate. Surpassing the critical shear stress causes the polymer chains to snap back elastically as they exit the restrictive geometry. This elastic recovery creates a matte or rough texture that compromises both aesthetics and mechanical performance.
Die design must include gradual transitions to minimize the shear rate at the wall.
Rheological Behaviour
Viscosity measurements determine the maximum allowable throughput for a given resin grade. When the local stress exceeds the critical shear stress, the predictable relationship between pressure and flow rate breaks down. Higher temperatures can shift this limit by reducing the relaxation time of the polymer.
However, excessive heat risks thermal degradation and colour shifts in sensitive resins.
Quality Failure
Surface roughness appears as the primary indicator of a process operating beyond its physical limits. Parts produced above the critical shear stress fail inspection for gloss and tactile consistency.