Meaning
Dimensional and weight discrepancies observed among parts produced simultaneously from different mold positions describe a fundamental quality challenge in multi-cavity injection molding. High cavity variance leads to inconsistent product performance and causes selective reject rates during automated assembly. This variation arises from differences in steel dimensions, non-uniform cooling, or unbalanced runner systems.
The property is typically measured across a production run using part weights or critical-to-quality dimensions.
Physical Origin
Inequality in cavity dimensions or flow paths introduces systematic differences during the polymer filling stage. While steel tolerances create permanent physical disparities, unequal melt delivery via unbalanced runners also drives cavity variance by generating different packing pressures. This imbalance occurs when the melt flowing to the outer cavities cools faster than the melt traveling to the inner cavities.
Molds with more than eight cavities are especially vulnerable. Thermal differences across the mold plates, caused by poorly routed cooling lines or mineral build-up in the channels, further aggravate the discrepancy by shifting the local resin solidification rates. Consequently, even identical steel dimensions yield non-uniform parts if the mold temperatures vary by more than five degrees.
Process Consequence
Inconsistent pressure distribution alters the shrinkage behavior of the cooling plastic inside each independent mold space. As a result, parts from lower-pressure positions exhibit larger dimensions, which increases the likelihood of sink marks and structural voids. High cavity variance frequently causes premature wear on ejector pins because some parts are packed tighter than others.
This elevates scrap rates during high-speed secondary assembly operations.
Control Method
Measurement of melt pressure and temperature directly within each mold pocket provides the necessary data to diagnose multi-cavity imbalances. Steel adjustment or the optimization of individual hot runner gate temperatures helps minimize cavity variance over extended production runs. This action ensures that each part undergoes identical packing.
Achieving this uniformity lowers the overall scrap rate and stabilizes part dimensions.