Meaning
Specialized high-speed tooling facilitates the production of lightweight plastic containers with wall thicknesses often below 0.5 millimeters. The operation of thin wall packaging molds involves high-performance tools designed to handle the extreme injection pressures and rapid cooling cycles required for food containers and lids. These tools feature stack heights and intensive cooling circuits to prevent the part from deforming as it is ejected.
They are built to withstand the stresses of cycles that frequently last less than five seconds.
Precision Alignment
Tapered locks are mandatory to keep the core and cavity from shifting under the 2000-bar injection pressures typical of this work. Because the material must travel a long distance through a very narrow gap, the tool must be extremely rigid to prevent the plates from bowing. Any slight deflection would cause significant variations in wall thickness and lead to part failure.
Thermal Management
Copper alloys with high thermal conductivity are often inserted into the core tips to pull heat away from the gate area. This cooling capacity is the primary bottleneck for cycle time, so the internal water channels are often placed within millimeters of the molding surface. Thin wall packaging molds often incorporate air-assist ejection to pop the part off the core without using pins.
Tooling Economics
The high cost of these tools is justified by the massive material savings achieved by reducing the plastic content of each container. Over millions of units, a reduction of 0.1 millimeters in wall thickness saves thousands of tons of resin. The mold must be maintained perfectly.