Meaning
Statistical measure of the sharpness of a surface height distribution profile governs the evaluation of mould cavity textures and the resulting aesthetic finish of moulded plastic parts. This metrology parameter, surface kurtosis Rku, distinguishes between surfaces with rounded peaks and those with sharp, spike-like asperities. A value greater than three indicates a surface dominated by sharp peaks or deep valleys, which can increase mechanical interlocking with the polymer.
Moulders use this metric to ensure that textured cavities will release the solidified part easily without scuffing or dragging.
Metrology Application
Surface profile analysis often requires more than just average roughness measurements to predict the tribological performance of tool steel. While average roughness provides a general height value, surface kurtosis Rku describes the shape of the surface profile. For example, a laser-textured mould with a high kurtosis value may have sharp spikes that scratch the polymer during ejection.
Conversely, a chemically etched texture with a low kurtosis has flatter plateaus that distribute the demoulding forces more evenly.
Process Influence
Friction during the ejection phase of the moulding cycle is highly sensitive to the shape of the cavity asperities. A mould surface with a high surface kurtosis Rku can lock the cooling polymer into its deep valleys, increasing the required ejection force and leading to part deformation. This risk is especially high for soft, ductile polymers like polyethylene, which can easily flow into and conform to sharp surface features.
Selecting a texture with a kurtosis close to or below three can significantly improve the demoulding behavior. Furthermore, this selection prevents the formation of micro-tears in the polymer skin during the ejection stroke, which improves the cosmetic and functional quality of the finished housing.
Defect Prevention
High ejection forces caused by improper mould texture can lead to stress whitening, ejector pin marks, or surface scratching on the moulded parts. Monitoring the surface kurtosis Rku of the tool steel after long production runs is also a valuable way to detect tool wear and degradation. Polishing or re-texturing the mould is necessary when the sharpness of the asperities changes enough to cause demoulding issues.