Meaning
Heat treatment processes of this classification heat steel to a temperature just below the lower transformation temperature to soften the material without microstructural recrystallization. For injection mould tooling, sub-critical annealing reduces the residual stresses introduced by heavy machining or rough grinding without causing the phase changes that lead to dimensional distortion. The tool steel is heated to a temperature between five hundred and sixty and six hundred and fifty degrees Celsius, held for several hours, and then cooled slowly.
This stress relief prevents the tool from warping during subsequent high-temperature hardening treatments. It is a cost-effective method for restoring ductility to work-hardened surfaces.
Machining Benefit
The softening of the steel improves its machinability, allowing high-precision tooling features to be cut with less tool wear and better surface finish. High shear forces during machining create a work-hardened surface layer that can cause uneven hardening or cracking if not addressed. This heat treatment relieves these localized stresses, ensuring the material responds uniformly to final hardening.
This step is particularly valuable for complex multi-cavity moulds where precision is paramount.
Microstructural Stability
Because the temperature remains below the critical point, the iron does not transform into austenite, preventing grain growth or decarburization. The existing carbides simply spheroidize, which reduces the hardness of the steel while maintaining its chemical homogeneity. This stable microstructure ensures that the tool can be finished to the tight tolerances required for injection moulding.
Process Limitations
This treatment does not provide the complete softening that full annealing achieves. However, it requires much less time and energy, making it the preferred choice for intermediate stress relief between machining stages. This process balance ensures high-quality tooling with minimal production delays.