Meaning
Metrological evaluation procedures compare contact stylus measurement data against non-contact optical surface profiling results. In polymer tool verification, stylus profilometry comparison identifies measurement discrepancies between physical probe contact and optical height detection on cavity inserts. Dual-technology evaluations reveal how surface optical reflectivity and slope angles affect reported roughness values.
Cross-technology validation establishes confidence in non-contact metrology routines used across molding operations.
Technique Discrepancy
Mechanical styli trace surface contours with physical diamond tips, applying contact force to tool surfaces. Fine tip radii penetrate narrow profile valleys that optical sensor spot sizes fail to resolve. Optical profilers eliminate mechanical contact, preventing surface scratching on soft aluminum prototype tools.
Specular reflections on polished steel produce artificial height peaks in optical data that do not appear in stylus profiles.
Moulding Application
Accurate surface roughness evaluation ensures consistent mold release and surface finish on injected thermoplastic parts. ABS housing components require precise cavity roughness to maintain consistent matte surface appearances across production runs. A stylus profilometry comparison reveals whether optical profilers underreport tool roughness due to spatial filtering effects.
Melt temperature variations affect polymer flow into micro-textures, making true baseline tool measurements essential for troubleshooting release failures. Regrind additions alter polymer melt viscosity, increasing surface sensitivity to microscopic tool scratches identified during cross-technology profile checks.
Validation Boundary
Physical tip radius limits prevent stylus profilers from measuring feature valleys narrower than probe tip dimensions. Optical profiler signal loss occurs on steep slopes where stylus probes maintain continuous contact. Stylus profilometry comparison validly assesses surface geometry only within overlapping measurement bandwidths of both instruments.