Meaning
Quantification of light reflected from a polymer surface at a specific angle relative to the incident beam provides a measure of visual quality. Standardized specular gloss measurement uses a specialized meter to shine light at a fixed angle and capture the return beam. Results are expressed in gloss units based on a black glass standard with a defined refractive index.
Surface Smoothness
Microscopic peaks and valleys on the polymer part scatter light and reduce the gloss value. Performing specular gloss measurement identifies whether the mould surface has been polished to the correct specification. Even small scratches or dust in the tool will show up as a drop in the reading.
Process Influence
Mould temperature and injection speed change how the plastic skin forms against the steel. A consistent specular gloss measurement across a production run indicates that the process variables are stable. Variations in gloss often signal a change in the cooling rate or a shift in the resin moisture content.
Meter Calibration
Accuracy depends on using a reference tile to set the instrument before each session. Choosing the correct angle for specular gloss measurement is necessary, with twenty degrees used for high gloss and eighty-five degrees for matte surfaces. This ensures the sensitivity of the meter matches the visual appearance of the part.
The geometry of the part can interfere with the reading if the surface is curved. Handheld meters must be held perfectly flat against the plastic to avoid light leakage. Regular cleaning of the optics is necessary to prevent false low readings.