Meaning
Thermal decontamination processes extract volatile organic contaminants and residual monomers from solid polymer flakes below the material melting point. Applying solid state stripping allows polyolefin and polyester recyclers to decontaminate post-consumer flake to food-contact purity standards without incurring thermal degradation from remelting. The process governs solid-state molecular diffusion rates by maintaining elevated temperatures under continuous gas sweep or high vacuum conditions.
It stops applying when polymer thermal transition temperatures are exceeded, causing flake agglomeration and reactor fouling.
Thermodynamic Mechanism
Sustained heating increases the vapour pressure and diffusion rate of entrapped volatile molecules within the solid polymer matrix. During solid state stripping, hot inert gas or vacuum removes desorbed species from flake surfaces, maintaining a driving concentration gradient. Extended residence times in vertical mass-flow reactors enable deep extraction of heavy volatile compounds that resist short melt-devolatilization steps.
Pellets treated through this method exhibit lower off-odor levels during subsequent moulding processes.
Quality Decontamination
Food contact approvals for recycled resins require verified extraction thresholds for chemical surrogate challenge tests. Utilizing solid state stripping reduces residual solvent and monomer levels below regulatory migration limits. Processors control reactor temperature and purge gas velocity to match incoming flake thickness.
Variations in flake size alter diffusion path lengths, requiring conservative residence time settings to ensure uniform purity.
Operational Boundary
Excessive reactor temperatures soften semi-crystalline flakes and trigger bed compaction. Thermal spikes inside the stripping vessel cause flake sticking and process interruptions.